MPLS TE

MPLS TE 

interface Tunnel0

 ip unnumbered Loopback0

 tunnel mode mpls traffic-eng

 tunnel destination 10.10.10.5

 tunnel mpls traffic-eng autoroute announce

 tunnel mpls traffic-eng priority 3 3

 tunnel mpls traffic-eng bandwidth 60000

 tunnel mpls traffic-eng path-option 1 dynamic

end

interface Tunnel1

 ip unnumbered Loopback0

 tunnel mode mpls traffic-eng

 tunnel destination 10.10.10.5

 tunnel mpls traffic-eng autoroute announce

 tunnel mpls traffic-eng priority 2 2

 tunnel mpls traffic-eng bandwidth 50000

 tunnel mpls traffic-eng path-option 1 explicit name red1

ip explicit-path name red1 enable

 next-address 10.0.0.14

 next-address 10.0.0.6

 next-address 10.0.0.10

 next-address 10.0.0.18

R4#sh mpls traffic-eng tunnels

P2P TUNNELS/LSPs:

Name: R4_t0                               (Tunnel0) Destination: 10.10.10.5
  Status:
    Admin: up         Oper: down   Path: not valid   Signalling: Down
    path option 1, type dynamic

  Config Parameters:
    Bandwidth: 60000    kbps (Global)  Priority: 3  3   Affinity: 0x0/0xFFFF
    Metric Type: TE (default)
    AutoRoute: enabled  LockDown: disabled Loadshare: 60000 [0] bw-based
    auto-bw: disabled

  History:
    Tunnel:
      Time since created: 4 minutes, 7 seconds
      Time since path change: 4 seconds
      Number of LSP IDs (Tun_Instances) used: 34
    Prior LSP: [ID: 34]
      ID: path option 1 [34]
      Removal Trigger: path error
      Last Error: RSVP:: Path Error from 10.10.10.4: Admission control Failure: Requested bandwidth unav

Name: R4_t1                               (Tunnel1) Destination: 10.10.10.5
  Status:
    Admin: up         Oper: up     Path: valid       Signalling: connected
    path option 1, type explicit red1 (Basis for Setup, path weight 4)

  Config Parameters:
    Bandwidth: 50000    kbps (Global)  Priority: 2  2   Affinity: 0x0/0xFFFF
    Metric Type: TE (default)
    AutoRoute: enabled  LockDown: disabled Loadshare: 50000 [40000] bw-based
    auto-bw: disabled
  Active Path Option Parameters:
    State: explicit path option 1 is active
    BandwidthOverride: disabled  LockDown: disabled  Verbatim: disabled


  InLabel  :  -
  OutLabel : FastEthernet1/0, 16
  Next Hop : 10.0.0.14
  RSVP Signalling Info:
       Src 10.10.10.4, Dst 10.10.10.5, Tun_Id 1, Tun_Instance 9
    RSVP Path Info:
      My Address: 10.0.0.13
      Explicit Route: 10.0.0.14 10.0.0.5 10.0.0.6 10.0.0.9
                      10.0.0.10 10.0.0.17 10.0.0.18 10.10.10.5
      Record   Route:   NONE
      Tspec: ave rate=50000 kbits, burst=1000 bytes, peak rate=50000 kbits
    RSVP Resv Info:
      Record   Route:   NONE
      Fspec: ave rate=50000 kbits, burst=1000 bytes, peak rate=50000 kbits
  History:
    Tunnel:
      Time since created: 4 minutes, 7 seconds
      Time since path change: 3 minutes, 6 seconds
      Number of LSP IDs (Tun_Instances) used: 9
    Current LSP: [ID: 9]
      Uptime: 3 minutes, 6 seconds

P2MP TUNNELS:

P2MP SUB-LSPS: